Film-wrapping packing machines Profi Packer® SCB 120i

These modern film banding packing machines are basically used for shrink banding of collated packs. The machines work with top and bottom film and, after welding with the permanently heated transverse welding punch, form a film curtain into which the products to be packaged enter.

After wrapping with shrink film, the packs are transported using an outfeed conveyor to the separate downstream under-air shrink tunnel, optimized in terms of air technology, and are shrunk by an electronically controlled hot air circulation system. The laterally protruding film material is shrunk on, but can also be rolled on with pressure rollers if required.


The two banding packing machines are state-of-the-art units with qualified technical fittings in a robust and durable design. The film banding packaging machines are controlled with a Delta PLC unit, optionally with a Siemens PLC unit.

The product is fed directly into the film curtain of the machine via an infeed belt, with the product length controlled by a photocell.

Film cycling banding packing machines
Profi Packer® SCB 60i
Profi Packer® SCB 80i
Monoblock incl. shrink tunnel

Profi Packer® SCB 120i
Profi Packer® SCB 150i

Film-wrapping packing machines Profi Packer® SCB 120i

Technical fittings of the machine

  • Motorised film roll drive for top and bottom film.
  • High quality paintwork.
  • Pneumatic welding punch closing / optionally via servo drive
  • Transverse welding punch with very low-wear, high-quality special teflonisation.
  • Very simple and easy to understand operation via a touchscreen.
  • Photocell vertical, horizontal and safety photocell
  • Robust steel frame design with the highest quality components.
  • Modern, easy-to-use Delta control system.
  • Travel direction of the machine: from right to left.
  • The machine complies with the current CE standard.

Available options:

  • Machine design completely in stainless steel
  • 90° forming shoulder with roller bearings close to the floor for easy loading
  • Travel direction left to right
  • Painted in colour of choice
  • 90° feeder with optional collecting station model R
  • Machine adaptations according to customer wishes
Profi Packer® SCB 120i
Feed belt width 800 mm
Welding punch width 1,240 mm
Clearance height 400 mm / optionally up to 550 mm
Machine dimensions 2,070 x 1,885 x 1,840 mm
Control and touchscreen DELTA® colour touchscreen
Film thickness 20 to 100 mµ
Film material LDPE, MDPE and HDPE
Film roll core Ø 76 mm
Max. film roll Ø 300 mm
Max. film roll width 1,300 mm
Compressed air 6 bar
Power type 400 V, 3 Ph., 50 Hz.
Maximum / average 3.0 kW / 1.5 kW
Working height 860 mm +/- 100 mm
Weight 235 kg
Colour grey
Capacity per minute** up to approx. 10 – 15 cycles
servo up to approx. 25 cycles
Film material Polyolefin fine shrink films, polyethylene, PVC; PLA and other organic films

* It is not possible to combine all maximum dimensions!

** The performance specification is not binding (approx. value), as it depends on the product dimensions, the film type, the material thickness and the skill of the operating staff.

*Pictures and videos may show optional equipment not included.