Film-wrapping machines Profi Packer® SCB 60i Motion with travelling sealing punch for very high cycle rates

These modern film banding packing machines are basically used for shrink banding of collated packs. The machines work with top and bottom film and, after welding with the permanently heated transverse welding punch, form a film curtain into which the products to be packaged enter.

After banding with shrink film, the packs go directly into the under-air shrink tunnel that is excellent in terms of air technology and are shrunk by means of the electronically controlled hot-air circulation. The laterally protruding film material is shrunk on, but can also be rolled on with pressure rollers if required.

The two banding packing machines are state-of-the-art units with qualified technical fittings in a robust and durable design. The film banding packaging machines are controlled with a Delta PLC unit, optionally with a Siemens PLC unit.

A photocell scans the products lengthwise when the product is fed by the infeed conveyor. The following product feeds are possible: Pneumatic insertion, feeding by infeed belt and 90° feeding with pneumatic insertion.

The machine fittings generally include an integrated shrink tunnel, fitted to the machine’s operational width.

Film cycling banding packing machines
Profi Packer® SCB 60i
Profi Packer® SCB 80i
Monoblock incl. shrink tunnel

Profi Packer® SCB 120i
Profi Packer® SCB 150i

Film-wrapping machines Profi Packer® SCB 60i Motion with travelling sealing punch for very high cycle rates

Technical fittings of the machine

  • Motorised film roll drive for top and bottom film.
  • Pneumatic welding punch closing / optionally via servo drive.
  • Transverse welding punch with very low-wear, high-quality special teflonisation.
  • Very simple and easy to understand operation via a touchscreen.
  • Photocell vertical, horizontal and safety photocell.
  • Robust steel frame design with the highest quality components.
  • Modern, straightforward Delta control.
  • Travel direction of the machine: from right to left.
  • High-quality, energy-saving insulation of the shrink tunnel.
  • Automatic cooling to 70 °C (only for Monoblock models).
  • Shrink tunnel with bar chain conveyor.
  • Quiet operation.
  • The machine complies with the current CE standard.

Available options:

  • Machine design completely in stainless steel
  • Shrink tunnel with plastic link chain
  • Full Complete Siemens fittings (control, touchscreen, servo motor and inverter)
  • 90° feeder with optional collecting station model R
  • Painted in colour of choice
  • Machine adaptations according to customer wishes
Profi Packer® SCB 60i Motion
Feed belt width 600 mm
Welding punch width 640 mm
Clearance height 200 mm / optionally up to 300 mm
Machine dimensions 3,350 x 1,130 x 1,840 mm
Control and touchscreen DELTA or Siemens
Film thickness 20 to 80 mµ
Film material LDPE, MDPE and HDPE
Film roll core Ø 76 mm
Max. film roll Ø 300 mm
Max. film roll width 600 mm
Compressed air 6 bar
Power type 400 V, 3 Ph., 50 Hz.
Maximum / average 13.2 kW / 7.5 kW incl. shrink tunnel
Working height 860 mm +/- 100 mm
Weight 820 kg
Colour grey
Capacity per minute** up to approx. 50 cycles
Film material Polyolefin fine shrink films, polyethylene, PVC; PLA and other organic films

* It is not possible to combine all maximum dimensions!

** The performance specification is not binding (approx. value), as it depends on the product dimensions, the film type, the material thickness and the skill of the operating staff.